IPN8710 corrosion-resistant steel pipe is essential for extremely dark, humid, and corrosive environments. For example, in relatively hidden locations like sewers, maintenance is extremely difficult when damage, such as pipe breakage, occurs. Therefore, using this type of steel pipe can extend its service life and provide strong corrosion resistance. Since its introduction, it has brought many conveniences. While its strong corrosion resistance makes purchasing a new pipe easy, replacing it can be a hassle. The time-saving and labor-saving IPN8710 corrosion-resistant steel pipe makes it a very convenient option.
Let’s take a look at the comprehensive performance of IPN8710 corrosion-resistant steel pipe!
1. Relatively simple surface treatment
2. Strong corrosion resistance
3. Reasonable price-performance ratio
In the past, steel pipe with or without a protective coating was generally referred to as non-galvanized steel pipe and was also widely used in other industries. Textured steel pipe primarily refers to seamless stainless steel pipe and welded stainless steel pipe. Due to cost and connection issues, it has not yet been widely used in large and medium-sized outdoor water supply pipelines.
Due to the influence of the raw materials used in anti-corrosion steel pipes, the product should be stored in a cool, well-ventilated, dry place away from fire and heat sources. It offers excellent corrosion resistance and rust prevention, and is odorless and non-toxic after curing. The membrane has a dense structure, good water permeability, strong adhesion, and a tough, complete coating. The primer is composed of polyurethane, polyethylene, modified epoxy resin, non-toxic anti-corrosion pigments, fillers, and additives. Curing at room temperature forms an interpenetrating network, resulting in a dense coating structure that is acid-, alkali-, and salt-resistant, with excellent rust prevention and strong adhesion. The topcoat is composed of epoxy resin, modified rubber resin, non-toxic anti-rust pigments, fillers, and additives.
Notes on the finish of IPN8710 anti-corrosion steel pipe:
Component A: Component B = 1 bucket: 1 bucket. Apply the first coat strictly according to the required ratio (or the manufacturer’s specified ratio at the time), and wait at least 24 hours before applying the second coat. After using the paint, the ends of the packaging drum must be tightly sealed to prevent deterioration due to moisture, alcohol, and water. After applying the paint film at room temperature, allow it to dry at room temperature for 7-10 days before use.
IPN8710 Anti-Corrosion Steel Pipe Finish: Composed of epoxy resin, modified rubber resin, non-toxic anti-rust pigments, fillers, and additives. It offers excellent chemical resistance, is non-toxic, and resists microbial corrosion.
IPN8710 Anti-Corrosion Steel Pipe Applications: IPN8710 primer is used for water supply pipes. IPN8710 topcoat is used as an anti-corrosion finish on the interior walls of water supply pipes.
Post time: Sep-16-2025