-
Material analysis of 3PE anti-corrosion steel pipe
3PE anti-corrosion steel pipe base material includes seamless steel pipe, spiral steel pipe and straight seam steel pipe. The three-layer polyethylene (3PE) anti-corrosion coating has been widely used in the oil pipeline industry due to its good corrosion resistance, water vapor permeability resi...Read more -
Advantages of hot-dip galvanized seamless steel tube
Hot-dip galvanized seamless tube is to make the molten metal react with the iron matrix to produce an alloy layer, so that the matrix and the coating are combined. Hot-dip galvanizing is to pickle the steel pipe first. In order to remove the iron oxide on the surface of the steel pipe, after pick...Read more -
Thermal expansion carbon steel pipe
What is heat-expanded steel pipe? Thermal expansion is a processing method of steel pipes, which is to process small-diameter steel pipes into large-diameter steel pipes. The mechanical properties of thermally expanded carbon steel pipe are slightly worse than that of hot rolled carbon steel pipe...Read more -
Structural seamless pipe
Structural seamless pipe (GB/T8162-2008) is a kind of seamless steel pipe used for general structure and mechanical structure. The fluid seamless steel pipe standard applies to seamless steel pipes that transport fluids. In addition to carbon (C) elements and a certain amount of silicon (Si) (gen...Read more -
How to avoid bubbles in welded carbon steel pipes?
It is common for welded carbon steel pipes to have air bubbles in the weld, especially large-diameter carbon seamless steel pipe weld pores not only affect the tightness of the pipeline weld and cause pipeline leakage, but also become the induction point of corrosion, which seriously reduces the ...Read more -
8 Precautions for seamless pipe forming
Forming and sizing of seamless pipes, some hole design and adjustment methods will directly affect the quality, so we should pay attention to the following eight points when handling the forming of seamless pipes: 1. Before there is no perforation, the hole shape of each rack should be adj...Read more -
10 ways to remove burrs from seamless steel tubes
Burs are ubiquitous in the metalworking process. No matter how advanced and sophisticated equipment you use, it will be born with the product. This is mainly due to the plastic deformation of the material and the generation of excessive iron filings at the edges of the processed material, especia...Read more -
Carbon steel tube welding process
Welding problems are sometimes encountered during the installation of carbon steel tubes. So, how to weld tubes? What should we pay attention to when welding carbon steel tubes? 1. Gas welding Gas welding can be used for welding, which is to mix combustible gas and combustion-supporting gas toget...Read more -
Iron oxide scale treatment on the surface of seamless tube
When the carbon steel tube is in use, the oxide film on the surface is not easy to fall off. Usually, oxide films are produced in a heating furnace. So, how to clean the oxide film on the surface of the carbon seamless steel tube? 1. Iron oxide scale cleaning machine treatment The scale cleaning ...Read more -
How to do the anti-corrosion work of thick-walled seamless tube?
The general application of thick-walled seamless tubes must do the corresponding anti-corrosion and anti-rust treatment work. The general anti-corrosion work is divided into three processes: 1. Anti-rust treatment of pipes. Before painting, the surface of the pipeline should be cleaned of oil, sl...Read more -
Precautions for spiral steel pipe stacking
Spiral pipe (SSAW) is a spiral seam carbon steel pipe made of strip steel coil as raw material, often warmly extruded, and welded by automatic double-wire double-sided submerged arc welding process. It is mainly used in water supply engineering, petrochemical, chemical, electric power, agricultur...Read more -
Production process of carbon steel welded pipe
Carbon steel welded pipes are mainly divided into three processes: electric resistance welding (ERW), spiral submerged arc welding (SSAW) and straight seam submerged arc welding (LSAW). The carbon steel welded pipes produced by these three processes have their own positioning in the application f...Read more
China's most trusted manufacturers of Stainless Steel Pipes & Tubes.
- Email Support info@hunantube.com
- Call Support +86-0731-88672086